Situation Analysis of The Timber Producers in The Turkey Central Anatolia Region

Main Article Content

Mehmet Colak
Tahsin Cetin

Abstract

It is necessary for producers to use their economic resources and integrate to foreign markets in order to survive. By doing so, they contribute to national economic growth and provide employment opportunities. Since it is crucial for a country to make use of the present raw material, we analysed the common problems that timber producers face and tried to find solutions to these problems. For this purpose, we conducted this study using the survey technique on timber producers in the provinces of the Central Anatolian Region. According to data we obtained, 89% of the producers use natural drying method, all of them determine product prices according to the cost, and process a minimum of 15 m3 of timber daily. The fact that the most of the participants were either elementary school or high school graduates shows that the education level of this industry is insufficient compared to other enterprises. Also, 98.2% of the participants didn’t export their products. This is a serious concern and possesses a danger for the future of the enterprises.


Keywords: forest product industry, raw ıssues, timber production, business problems

Downloads

Download data is not yet available.

Article Details

How to Cite
Colak, M., & Cetin, T. (2016). Situation Analysis of The Timber Producers in The Turkey Central Anatolia Region. Global Journal of Business, Economics and Management: Current Issues, 6(2), 154–163. https://doi.org/10.18844/gjbem.v6i2.1353
Section
Article
Author Biographies

Mehmet Colak, Mugla Sitki Kocman University

Department of Wood Industrial Engineering

Tahsin Cetin, Mugla Sitki Kocman University

Department of Wood Working Industrial Engineering

References

Acar, H.H., Senturk, N., (1996) Removing from the chamber in Artvin Forestry Administration Tools from the pain of the Technical Investigation, Istanbul University Faculty of Forestry Journal, Series: B-44, p:113–119.

Acar, H.H., Senturk, N., (2000) Mechanization of Production Work in mountainous forest areas, Istanbul University Faculty of Forestry Journal, Series: B-46, p:77–94.

Akay, A.E., Serin, H., Erdas, O., (2007) Forest products in the Implementation of Optimum Sizing Method, Bottlenecks Scope of Functions of Forest Resources, Solution Proposals and Priorities, 17-19 October, Istanbul.

Aksu, B.K., Koc, H., Kurtoglu, A., (2011) The forest products industry in Turkey, African Journal of Business Management, Vol:5 (6), pp. 2363-2369, 18 March. Available online at, http://www.academicjournals.org/AJBM, ISSN 1993-8233©2011, Academic Journals.

Akyuz, K.C., (2000) Involved in the Eastern Blacksea Region Small and Medium-Sized Businesses Structural Analysis of Forest Products Industry, PhD Thesis, Karadeniz Technical University, Trabzon.

Anonymous, (2007) The Ninth Development Plan, Forestry, Report of the Special Commission, the State Planning Organization, Publucation, Num: SPO-2712-OIK-665, Ankara.

Berber, M., (1996) Regional Manufacturing Industry Structural Analysis, Trabzon Eastern Black Sea Sub-Region Development Project Sector Analysis (The project 93.115.001.3) 127-154, Trabzon.

Calıskan, E., (2008) Transport of raw wood on Forest Road Network Optimization with Simulated Annealing, Karadeniz Technical University, PhD Thesis, p:162, Trabzon.

Cindik, H., Serin, H., Akyuz, K.C., (2002) Eastern Black Sea and eastern Mediterranean region in the Forest Products Industry Establishments SME Qualifications Socio-Economic Aspects Investigation (Trabzon and Icel Example), II. Proceedings of the National Forestry Congress, Vol: 3, 15-18 May, Artvin.

Demir., Y., Sutcu, A., (2002) After the Crisis of Isparta SMEs Forest Industry Production, Technology and Analysis of Financial Problems, SDU Faculty of Forestry Journal, Vol:2, p:79-96, Isparta.

Fusunoglu, M., (1993) Industrialization and Technology Policy, Yearbook of Industrial Development Bank of Turkey, p:209, Ankara.

Gultekin, Y.S., Kayacan, B., Ok, K., (2009) Duzce Province of the wood raw material demand on Forest Industry Research, Duzce University, Journal of Forestry, Vol:5/2, p:75-94, Duzce.

GDF, (2009) General Directorate of Forestry Production and Marketing Activities, p:26, Ankara.

Kaplan, E., (2008) Demand in Turkey with Forest Products Supply Source Assessment and Location of Industrial Plantations, Forest Resources Functions Scope Bottlenecks, Solutions and Priorities, General Directorate of Forestry, p:1-16, Ankara.

Kok, G., (2009) Supply and Demand for forest products in the world and in Turkey Relations, II. Socio-Economic Issues in Forestry Congress, p:349-360, Isparta.

Kurtoglu, A. Koc, K.H., Erdinler, E.S. Sofuoglu, S.D. (2009) Turkey Structural and Educational Problems of Forest Products Industry, II. Socio-Economic Issues in Forestry Congress, p:176-186, Isparta.

SPO, (2006) VIII. Five-Year Development Plan Report of the Special Commission on Forestry, State Planning Organization, Ankara.

Sakarya, S., Canli, S., (2011) Timber Report, The Central Anatolian Exporters Union, Ankara.

Sariaslan, H., (1996) Turkey's Economy Small and Medium-Sized Enterprises of Manufacturing Industry Business Problems and New Strategies, TOBB Publication, Ankara.

Serin, H. Akyuz, K., Cindik, H., (2002) Icel City Small and Medium Forest Products Industry Establishments Structure, Problems and Proposed Solutions, Gazi University Faculty of Forestry Journal, Vol: 2, p:34-46, Ankara.

Serin, H., (1997) Icel City Small and Medium Forest Products Industry Establishments Assessment of Socio-Economic Aspects, KTU Institute of Science and Master of Science Thesis, Trabzon.

TSI, 1350., (1975) Round wood and timber stacking rules, Turkish Standards Institute, Ankara.

Ustaomer, D., Usta, M., (2012) The effects of boron compounds and different melamine contents in MUF resins on some properties of MDF panels, BioResources, Vol:7/1, p:437-446.

Yildirim, H.T., Candan, Z. Korkut, S., (2014) Wood-Based Panels Industry In Turkey: Future Raw Material Challenges And Suggestions Maderas. Ciencia y tecnología Vol:16/2, p: 175-186, 2014 ISSN impresa 0717-3644, ISSN online 0718-221X, DOI:10.4067/S0718-221X2014005000014.